|
Posters from Site Visit 2003
Topic 1.1 Overview of Fiber Spinning and Film Casting Model of Film Blowing Development of Framework for Solving Fiber Spinning and
Film Casting Problems Brownian Dynamics Simulations of Fine-Scale Molecular Models
in Complex Flow Calculations Molecular Simulation of Polymer Crystallization: Nucleation
from Pre-Oriented Melts A Novel kinetic Monte Carlo Technique for Moedling Polymer
Crystal Phase Growth A Two-Phase Self-Consistent Model for the Deformation and
Phase Transformation Behavior of Polymers above the Glass Transition
Temperature: Application to PET A 3D Simulation Study of Barrier Properties of Nanocomposite
Films Simulation of Liquid Crystalline Polymer Deformation During
Isothermal Fiber Spinning of In Situ Composites Optimal Control for Polymer Processing Modeling of Dry Spinning of Polymer Fibers
Online Fiber Diameter Measurements of Melt Spun Fiber Using
Fraunhofer Diffraction Online Measurements of Crystallinity and Investigation
of Structure-Property Relationships in Single and Multilayer
Blown Film Extrusion Radiative Heat Transfer in Multifilament Fiber Spinning Local Convective Heat Transfer from Extruded Fibers X-ray Diffractioin System for On-Line Fiber WAXD and SAXS
Measurements Rheological Characterization of Nylon 6, atactic Polystyrene,
and Isotactic Polypropylene Structural Formation of Amorphous PET under Uniaxial Deformation Test Method to Measure the Stress-Strain Response of Polymer
Film Topic 1.3 Meta-Scheduling for Mini-Grids Profiling Parallel Applications in Coven Checkpointing Parallel Applications in Coven Beowulf network Transport Thrust Two Topic 2.1 Production of Carbon Fibers for Environmental Applications The Effectof Metal Salts on the Activation of Carbon Fibers Mixtures of Petroleum Macromolecules: Fractionataion, Characterization,
and Phase Behavior Rheological and Flow Modeling of Mesophase Pitches Advanced UV Stabilization Routes for Carbon Fibers Produced
from Melt-Processible PAN Terpolymers Rheology and Microstructure of Modified Mesophase Pitch Rheology and Microstructure of Thermotropic Liquid Crystalline
Copolymers
Topic 2.2 Matrix-Functionalized Carbon Nanotubes for Polymer Carbon
Nanocomposites Mechanical and Electrical Properteies of Solution-Processed
Polyaniline/Multiwalled Carbon Nanotube Composite Films Effect of Functionalized Single-Wall Carbon Nanotubes on
PVA Morphology and Tensile Properties Properties of PVA Composites Reinforced with Functionalized
Carbon Nanotubes Development of Structure-Property Relationships for Polyactides:
A Quantum and Molecular Modeling Approach A Novel Stationery Phase: Capillary-Channel Fibers for
HPLC separations of Proteins Development of a New Reverse Phase Liquid Chromatography
Method Utilizing Capillary-Channeled Fibers for the Separatioin
of Small Biomolecules Topic 2.3 Effect of Process Variables and Dopants on Characteristics
of Electrochemically Deposited PEDO Films Highly Conjugated Polymers: From Films to Molecular Wires
Topic 3.1 Understanding Supercritical Fluid Rapid Expansion Processes:
RESS vs. RESOLV The Rapid Expansions of Supercritical Solutions containing
Cellulose Triacetate Preparation of Narrowly Distributed Silver Nanoparticles
via Rapid Expansion of Water in Carbon Dioxide Microemulsion
into Liquid Solution Protein-Conjugated Nanoparticles from Rapid Expansioin
of Supercritical Fluid Solution into Aqueous Solution
Barrier Properties of Polymer Nanocomposites Containing
Clay Platelets Oriented by Chaotic Advection Control of Directional Electrical Conductivities in Extruded
Films Produced by Chaotic Advection Importance of Holes in Multi-Layer Melts to Obtaining a
Variety of Blend Morphologies by Chaotic Advection Smart Blending Technology to Produce Plastics with Enhanced
Properties A Route to Hole Formation in Multilayer Films Introduction to the Use of Sulphonyl Azides in Polymeric
Materials A Novel Approach to Developing Compatibilizers Topic 3.3 Structure and Properties of Ultrathin Polythiophene Films Study and Characterization of Poly(itaconic acid) Grown
from Surface-Tethered Iniators by Atom Transfer Radical Polymerization
in Aqueous Solution Grafting Branched Architectures from an Ethylene-Acrylic
Acid Copolymer Film Surface Polymer Surface Modificatioin via Grafting: Multi-Stimuli
Responsive Polymer Surfaces PET Surface Modification Using Hydrophilic Dendritic Polymers Design of Polymer Films with Adaptive Surfaces Surface Modification of Ethylene-Co-Acrylic Acid Copolymer
Films with Amide via Surface Immobilized Amino Acid Intermediates |
| This work was supported by the Engineering Research Centers Program of the National Science Foundation under NSF Award Number EEC-9731680. Any opinions, findings, conclusions, or recommendations expressed in this material are those of the author(s) and do not necessarily reflect those of the National Science Foundation. | |||
|
|
|
 |
|
ERC Program |
University |
|
|
Clemson University -- Massachusetts Institute of Technology -- Clark Atlanta University
This page is maintained by the CAEFF webmaster.
Clemson University, Clemson, South Carolina 29634 -- Area Code 864 -- Information 656-3311
Copyright © 2005 Clemson University. All rights reserved.